Your best friend for file transfer.

OSX, Passive Mode, and Airport (9 posts)
- Started 21 years ago by dstark
- Latest reply 21 years ago from velocite
-
dstark Member
-
Jim Matthews Administrator
It may be that you need Fetch 4.0.2, which should be available for testing later this month. But I'd be curious to see the contents of the Fetch Transcript window when you try with passive mode turned off.
Thanks,
Jim Matthews
Fetch Softworks -
dstark Member
Okay, here's the transcript with Passive mode off. It hangs at:
"257 '/CLIENTS' is your working directory"Connecting to server.fbhc.org port 21 (3/13/02 10:02:26 PM)
220 Service ready for new user.
ADAT
530 Not logged in.
USER ******
331 User name okay, need password.
PASS
230 User logged in, proceed.
SYST
215 UNIX Type: L8 Version: SnapOS.
PWD
257 "/" is your working directory.
MACB ENABLE
502 Command not implemented.
CWD CLIENTS
250 Requested file action okay, completed.
PWD
257 "/CLIENTS" is your working directory.
ABOR
CStreamOT::Read() OTRcv() returned -3208
225 Canceling file transfer ...Originally posted by JimMatthews:
It may be that you need Fetch 4.0.2, which should be available for testing later this month. But I'd be curious to see the contents of the Fetch Transcript window when you try with passive mode turned off.
Thanks,
Jim Matthews
Fetch Softworks -
Jim Matthews Administrator
Thanks; I think you'll need to wait for 4.0.2. Let me know if you'd like to test a prerelease version.
Thanks,
Jim Matthews
Fetch Softworks -
dstark Member
I'd love the pre-release version. Thanks!
-
dllaferty Member
I have the exact setup (cable modem, airport, linksys router, osx) and problem as dstark and since I run a remote office in NM for my company based in IL, my ability to get to my Snap Server is vital. Can I get a copy of the 4.0.2 Beta to try?
-
Jim Matthews Administrator
You can get Fetch 4.0.2b1.sit at:
http://getfetch4.com/Fetch_4.0.2b1.sit
Thanks,
Jim Matthews
Fetch Softworks -
dstark Member
Works like a charm.
-
velocite Member
fwiw
thanks for the great product and i'm about to upgrade from ye' old fetch 2.1.2i downloaded 4.02 after having the same problems with 4.0.1 and reading others osx problems, loaded it onto ibook with 10.1.3 and found once both' internet config' AND 'passive' were off it worked fine
john
sydney australia
- Page 1
Topic closed
This topic has been closed.
Okay, when Passive Mode is turned off, I have the "Getting File List..." message that never stops. When I turn Passive Mode on, I get "Server File Error: Data transfer not implemented for client default data port. Need 'PORT' command first." I get these errors even after disabling all but my active Nework port - which is Airport.
I'm using a linksys base station, Airport 2.0.2, OSX 10.1.3, Fetch 4.0.1. FTP from the terminal works fine, but I want to use Fetch. Any suggestions?
Posted 21 years ago #